Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
894 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1018 ABRT The test was disabled via translation. Determine why the test has been
disabled before you enable it.
1. Verify that the Maintenance Test field on the Trunk Administration
form is n. Enter y to enable the test.
2. Repeat the test.
1020 ABRT The test did not run due to a previously existing error on the specific port
or a more general circuit pack error.
1. Examine Error Log for existing errors against this port or the circuit
pack and attempt to diagnose the previously existing error.
S8300 /
G700
1412
ABRT This test does not execute on a G700 media gateway.
2000 ABRT Response to the test was not received within the allowable time period.
1. Rerun the test at 1-minute intervals up to 5 times.
2100 ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
2053 ABRT At least one of the following errors is found on the DS1 circuit pack
(DS1-BD or UDS1-BD):
1281 – Loss of signal, 1793 – Blue Alarm, 2049 – Red Alarm, 2305 –
Yellow Alarm, 1537 – Hyperactivity
1. Resolve any of the previous error types.
Table 305: Test #7 Conference Circuit Test (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 4