Filter
Top Products
Denial Event Tables
Issue 1 June 2005 225
1786
1
CC: MG not administered Contact-closure related operation had
unadministered media gateway number.
1787
1
CC: MG not registered An unregistered media gateway was selected for
a contact-relay related operation on a G350
Media Gateway.
1788
1
CC: MG in link recovery The G350 Media Gateway selected for a
contact-relay related operation was in link
recovery mode.
1789
1
CC: No CC on this MG type The media gateway selected for a contact-relay
related operation does not have a contact relay.
1789
1
Communication
Manager
Re-
lease 2.2
CC: MG not a G350 gateway The media gateway selected for a contact-relay
related operation is not a G350.
1790
1
CC: Invalid button push An invalid feature button was pushed after
invoking contact closure feature.
1791
1
CC: Trunk usr not allowed Trunk access is not allowed for contact closure
feature.
1792 MI Chg Fail: Agt Burnout Deny change to manual-in mode because the
agent is in burnout state.
1793 AI Chg Fail: Agt Burnout Deny change to auto-in mode because the agent
is in burnout state.
1794 No STNHNT for Remote cvg. Deny station hunt after coverage if the last
coverage party is remote.
1795
Communication
Manager
Release
2.2
Caller FEAC restricted access.
1796-
1899
not assigned
1. Error codes 1781 through 1791 apply to Feature Access Code invocations that are designed to operate on
contact closure relays on a G350 Media Gateway. These error codes apply only to Linux-based servers.
Table 50: Call Process denial events (1225 - 1899) (continued)
Event
Type
Event Description, as it
appears on the event log
Explanation Event
Data 1
Event Data 2
33 of 33