ATM-BCH (ATM B-Channel Trunk)
Issue 1 June 2005 519
1120 ABRT Trunk OUT-OF-SERVICE/FAR-END
3. Try to change the service state via Test #256 (Service State Audit test).
4. Try the test again.
1122 ABRT No test-line number for the far-end switch
1. Check the Trunk Group screen.
1123 ABRT No Feature Access Code administration for this Facility test
1. Check the Dial Plan and Feature Administration forms.
2000
2012
None
ABRT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2035 ABRT Call timed out
1. Wait 1 minute, and try again.
2036
–
2037
ABRT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2038
–
2039
ABRT Problem reading test data
1. Wait 1 minute, and then try again.
2. If the test aborts again, there is a serious internal problem.
2040 ABRT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2041 ABRT Call timed out
1. Wait 1 minute, and try again.
2066 ABRT Could not establish test call
1. Retry the command up to 5 times at 1-minute intervals.
2067 ABRT Call timed out
1. Wait 1 minute, and try again.
Table 164: Test #258 ISDN Test Call (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 5