Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
ANL-LINE (8-Port Analog Line)
Issue 1 June 2005 415
1006 ABRT This port has been busied out by command or taken out-of-service by the
failure of the NPE Crosstalk test.
1. Look in the Error Log for Error Type 18 (port busied out) for this port. If
this error is present, then release the port with release station
extension and run the test again.
2. Look in the Error Log for Error Type 1025 (NPE Crosstalk test failed)
for this port. If this error is present, then investigate the errors
associated with the NPE Crosstalk test (#6) first.
3. Make sure that the terminal is connected and in service, and then
retest.
2000 ABRT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals up to 5 times.
2100 ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1 FAIL This does not indicate a hardware problem. The switchhook audit failed,
and the other updates were not performed because of this failure. This
condition may occur when the audit is performed at the same time that the
terminal equipment goes off-hook. Use status station to determine
when the port is available for testing.
1. When the port becomes available for testing, retry the command at
1-minute intervals up to 5 times.
5 FAIL This does not indicate a hardware problem but may indicate an internal
software error. The message waiting lamp update failed. The translation
and ringer updates were not performed because of this failure.
7 FAIL The translation update failed. The ringer update was not performed
because of this failure. This does not indicate a hardware problem but may
be an internal software error.
8 FAIL This does not indicate a hardware problem but may be an internal software
error. The ringer update failed.
1. Retry the command at 1-minute intervals up to 5 times.
Table 122: Test #36 Station Status and Translation Audits and Updates Test (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 3