Filter
Top Products
ATM-NTWK (ATM Network Error)
Issue 1 June 2005 583
Notes:
a. Aux Data values for Setup and Add Party (XX = port network, YYY = location code). Aux
Data values for WSP Setup (XX = WSP number, YYY = location code). Table 190: Location
codes from Aux Data values on page 583 is a list of UNI 3.1 location codes:
b. Error Types 257 to 300: used to determine the destination PNC connection number of an
ATM Network connection that is experiencing an impaired path. The connection number is
obtained by subtracting 256 from the number that is shown in the Error Type field. See the
following example:
If the Error Type field = 263, subtract 256, which equals 7, the PNC destination
connection number.
The Aux Data field contains the originating and destination PN number (XXYY). Where XX
= the originating PN #, and YY = the destination PN # for example:
1. Aux Data = 302
3 = orig
2 = dest
2. Example Aux Data = 1510
15 = orig
10 = dest
c. Error Type 301 indicates that there is a system wide impaired path network problem.
Note:
Note: Under certain circumstances network errors can be against the ATM EI board.
Table 190: Location codes from Aux Data values
Setup
(Location
Code)
Add Party
(Location
Code)
WSP Setup
(location
Code)
Location Code Meaning
0 500 800 User
1 501 801 Private network serving the local user
2 502 802 Public network serving the local user
3 503 803 Transit network
4 504 804 Public network serving the remote user
5 505 805 Private network serving the remote user
7 507 807 International network
10 510 810 Network beyond interworking point