Filter
Top Products
LEDs
266 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Table 67: Switch Node Interface (SNI) yellow LED flashing states on page 266 illustrates the
SNI yellow LED states.
Tone-Clock circuit pack LEDs
The Tone-Clock circuit packs found in non IPSI connected port networks have the standard red,
green and yellow LEDs. The red LED has the traditional meaning. The yellow and green LEDs
flash in specific patterns to indicate the status of the circuit pack. The standby status applies
only to systems with a duplication option.
Maintenance/Test circuit pack LEDs
The TN771D maintenance/test circuit pack has the standard red, green, and yellow LEDs. The
red and green LEDs have the traditional meaning, where red indicates an alarm condition, and
green indicates testing in progress.
The yellow LED can be off or on continuously or flashing, depending on the mode of operation
of the TN771D and whether or not it has detected errors. The yellow LED is on steady when the
TN771D’s analog test port or digital test ports are being used to test trunks or line circuits. The
yellow LED is also used to indicate packet-bus status. Table 68: TN771D Maintenance/Test
Yellow LED States on page 267 illustrates the maintenance/test yellow LED states as they
apply to packet-bus activity.
Table 67: Switch Node Interface (SNI) yellow LED flashing states
LED
on
LED
off
Condition
0.1 sec 0.1 sec Fiber Out-of-Frame. This state indicates a failure of test #238, which may
be caused by absence of the opposite end EI or Switch Node Interface, a
broken or missing fiber, or a missing lightwave transceiver on either
endpoint.
0.5 sec 0.5 sec In Frame — No Neighbor. This state corresponds to a failure of test #
237, usually due to a failure of this SNI, or the EI or SNI at the opposite of
the fiber. This condition may also be due to a faulty Switch Node Clock
(SNC).
solid
on
SNI Active. This is the normal state for an active SNI.
solid
off
SNI Standby. This is the normal state for a standby SNI in systems with a
duplication option.