Filter
Top Products
Viewing Communication Manager Alarms
Issue 1 June 2005 329
Viewing Communication Manager Alarms
The technician views Communication Manager alarms and events through commands that are
available via the Web Interface or the SAT command-line interface. See Table 86: Commands
for Viewing Communication Manager Alarms on page 329.
Command Syntax
Maintenance commands use a different command syntax depending upon whether they refer to
port network circuit packs or media gateway Media Modules.
VOIP Media Module (MM760) Board (MG-VOIP)
Voice Announcements
(Communication Manager)
Board (MG-ANN)
Announcement Ports (VAL-PT)
Ethernet Port (ETH-PT)
Table 85: Media Module Tests (continued)
Media Module Maintenance Object
2 of 2
Table 86: Commands for Viewing Communication Manager Alarms
Command Interface Purpose Description
View Current Alarms Web Interface,
under Alarms and
Notification
View a list of outstanding
alarms against
Communication Manager
Displays a summary of alarms,
if present, followed by a
detailed table of explanation.
display alarms SAT CLI View logged Communication
Manager alarms
These are alarms that have not
yet been cleared, either
manually or via an Expert
System.