Filter
Top Products
VAL-BD (Voice Announcements over LAN Circuit Pack)
Issue 1 June 2005 2481
Amber On solid Firmware is self-downloading to the circuit pack.
!
CAUTION:
CAUTION: You can lose the resident firmware image file if you
reset the circuit pack during firmware download. If
this happens, FTP a new firmware image file to the
VAL circuit pack and perform the Firmware download
procedure again.
Amber Fast flash
(100 ms on/
100 ms off)
Occurs during circuit pack insertion or circuit pack reset which the
announcement files are being copied from FLASH to RAM. If you
reset the circuit pack during this time, your announcement files
remain intact.
Amber Slow flash
(200 ms on/
200 ms off)
Flashes during autosave while copying announcement files from
RAM to FLASH.
!
CAUTION:
CAUTION: You can lose the announcements on the circuit pack
if you reset it during an autosave.
LINK On/off Active Ethernet link
TRMT Intermittent Transmit
RCV Intermittent Receive
100M On/off Off = 10-Mbps Ethernet connection
On = 100-Mbps Ethernet connection
FDX On/off Off = half-duplex connection
On = full-duplex connection
COL On/off Off = no collisions detected
On = collisions detected
Table 877: TN2501AP LEDs (continued)
LED Behavior Description
2 of 2