Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
818 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
S8300 / G700
The MM710 supports T1/E1, and delivers the same functionality as the TN464 circuit pack.
Although CO-DS1 is provided for G700/G350 Media Gateways, CO-DS1 only partially supports
the MM710 DS1 Media Module.
Three trunk service states are specified by DS1 CO trunk maintenance:
Error Log Entries and Test to Clear Values
out-of-service The trunk is in a deactivated state and cannot be used for either
incoming or outgoing calls.
in-service The trunk is in an activated state and can be used for both
incoming and outgoing calls.
disconnect
(ready-for-service)
The trunk is in an activated state but can only be used for an
incoming call.
Table 281: DS1 CO Trunk Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test to Clear Value
0 (a
) 0 Any Any Any test trunk grp/mbr
1 (b) 57408
1 (b) 57487
15 (c) Any Port Audit and Update (#36)
18 (d)0 busyout trunk grp/mbr WRN OFF release trunk grp/mbr
130 (e
) None WRN ON test trunk grp/mbr
257 (f) 57392 DS1 CO Dial Tone Seizure (#314)
G700 aborts with Error Type 1412
MIN
WRN
OFF
513 (g
) 57393 DS1 CO Dial Tone Seizure (#314)
G700 aborts with Error Code 1412
MIN
WRN
OFF
769 (h) 57484
1025 DS1 CO Dial Tone Seizure (#314)
G700 aborts with Error Code 1412
MIN
WRN
1
OFF test trunk grp/mbr r 2
1281 Conference Circuit (#7)
G700 aborts with Error Code 1412
MIN
WRN1
ON test trunk grp/mbr l r 4
1537 NPE Crosstalk (#6)
G700 aborts with Error Code 1412
MIN
WRN1
ON test trunk grp/mbr l r 3
1 of 2