Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1290 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1416 ABRT The lightwave transceiver is absent from Endpoint 2 of the fiber link. Use
list fiber-link to display fiber link endpoints.
1. If a lightwave transceiver should not be present (for example, an SNI
connected to a DS1 converter circuit pack), do nothing.
2. Otherwise, continue with the following steps.
3. Check the lightwave transceiver connections.
4. Replace the lightwave transceiver.
5. Replace the SNI circuit pack.
2100 ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 3 times.
2300 ABRT The downlink message necessary to run this test could not be sent.
1. Retry the command at 1-minute intervals up to 3 times.
2301 ABRT The software timer could not be set before sending the downlink message
necessary to run this test.
1. Retry the command at 1-minute intervals up to 3 times.
2304 ABRT The SNI circuit pack responded that it is not able to run the test requested
by software.
1. Retry the command at 1-minute intervals up to 3 times.
Table 443: Test #989 SNI Fiber Out of Frame Query (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 9