Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1592 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
System Technician-Demanded Tests: Descriptions and Error
Codes
Investigate tests in the order presented below. Clearing Error Codes associated with the one
test may also clear errors generated from other tests in the sequence.
Control Channel Loop Around Test (#52)
Refer to the repair procedure described in XXX-BD (Common Port Circuit Pack/Media
Module) on page 2539.
NPE /NCE Audit Test (#50)
This test will abort with ABRT code 1412. This test is an audit that sends network update
messages to various ports on a board. Since the Media Server does not handle network
connections for the Media Gateway, this test is not intended to be run.
SAKI Sanity Test (#53)
!
CAUTION:
CAUTION: This test is destructive.
Refer to the repair procedure described in XXX-BD (Common Port Circuit Pack/Media
Module) on page 2539. This test is only run as a part of a reset board procedure.
LAN Receive Parity Error Counter Test (#595)
The test reads and clears a circuit pack’s LAN Receive Parity Error Counter.
Order of Investigation Short Test
Sequence
Long Test
Sequence
D/ND
1
1. D = Destructive; ND = Nondestructive
Control Channel Loop-Around (#52) X X ND
NPE/NCE Audit Test (#50). Aborts with Error Code 1412 X ND
LAN Receive Parity Error Counter (#595) X ND
SAKI Sanity Test (#53) X D