Filter
Top Products
ASAI-PT
Issue 1 June 2005 505
Clear Error Counters Test (#270)
There are various error counters associated with each ASAI-PT. This test clears those counters
and triggers the auditing of layer-3 reinitialization. This test is used only to send messages to
the ASAI-PT and should not abort nor fail. ASAI uses a fixed TEI value of 1.
Table 156: Test #270 Clear Error Counters
Error
Code
Test
Result
Description / Recommendation
Any ABRT This test should never abort.
Any FAIL This test should never fail.
1. Retry the command at 1-minute intervals up to 5 times.
PASS The message to clear the error counters of the ASAI-PT has been sent.