Filter
Top Products
S8710 Alarms
Issue 1 June 2005 123
S8710 server BIOS error messages
The S8710 server BIOS error messages are listed and interpreted in Table 37 .
Threshold Temperature: above for which an alarm is generated, in degrees Fahrenheit
and Celsius.
Table 36: S8710 Temperature and voltage report (continued)
Field Description
2 of 2
Table 37: S8710 BIOS error messages
Error
Code
Description Audible
Beeps
Possible Problem Possible Action
207 Memory configuration
warning; DIMM in DIMM
Socket X is not 4 bytes
wide (32 bits) and only
supports standard ECC.
None Installed DIMMs are
8 bytes wide (64
bits).
Escalate; replace
the media server
209 Online spare memory
configuration; spare bank
is invalid. Mixing of DIMMs
with 4 and 8 byte widths is
not allowed in this mode.
One
long and
one
short
Installed DIMMs for
online spare bank
are of a different
primary width than
the DIMMs in other
banks.
Escalate; replace
the media server
NA A mixture of 533-MHz and
400-MHz front side bus
speed processors
detected. All processors
must have the same front
side bus speed. System
halted.
One
long and
one
short
Wrong processors;
Processors have
different front side
bus speeds.
Escalate; replace
the media server
NA Media server only supports
400-MHz front side bus
speed processors. One or
more 533-MHz front side
bus speed processors
have been initialized at 400
MHz.
One
long and
one
short
Wrong processors;
Media server does
not support a front
side bus speed of
533 MHz.
Escalate; replace
the media server