Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
2518 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
VC-DSP Port DSP Loop-Back Test (#1105)
This test is destructive.
This test verifies the connectivity of a VC-DSPPT across the TDM bus. It aborts if calls
associated with the port are in progress. Failure of this test indicates an on-board fault
associated with the port hardware on the circuit pack.
4–7 FAIL The Conference Circuit test failed.
1. Replace circuit pack.
PASS The VC DSP Port Local TDM Loop-Around test passed.
Table 893: Test #1104 VC DSPPT Local TDM Loop-Back Test (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 3