Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
730 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
2069 ABRT The endpoint has returned an error response to the switch sent application
message.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2000 FAIL No response is received from the endpoint or the adjunct. For BRI
endpoints:
1. Consult the endpoint’s documentation to determine whether ISDN-BRI
Management and Maintenance Procedures are supported. If not
supported, use change station extension to change the MIMs
Supported field to n. Use busyout station extension and
release station extension to busyout and release the endpoint
to resolve any endpoint alarms resulting from failure of this test.
2. If the endpoint supports these procedures and the test continues to fail,
assume the endpoint is defective and replace it.
PASS The endpoint has successfully responded to the switch’s application
message.
Table 246: Test #629 BRI Layer 3 Query (continued)
Error
Code
Test
Result
Description / Recommendation
4 of 4