Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1170 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order presented.
Tone Detection Verification Test (#42)
This test checks out a single ETR port’s touch-tone receiver mode, MFC tone-detection/
generation mode, and general-purpose tone-detection mode. During the test sequence, these
modes are tested in the following order:
1. Touch-tone receivers
2. General-purpose, call-progress, and maintenance tones
3. MFC tones
Order of Investigation Short Test
Sequence
Long Test
Sequence
D/ND
1
1. D = Destructive; ND = Nondestructive
Tone Detection Verification test (#42) X X ND
Tone Detection Audit/Update test (#43) X X ND
Table 403: Test #42 Tone Detection Verification Test
Error
Code
Test
Result
Description / Recommendation
none ABRT The system was not able to allocate every resource needed for this
test, or there was an internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
1 ABRT The system could not allocate every resource needed to test the tones.
1. Retry the command at 1-minute intervals up to 5 times.
1001 ABRT The system was unable to put the ETR-PT in the appropriate mode to
test it.
1. Retry the command at 1-minute intervals up to 5 times.
1 of 3