ATM-INTF (TN2305/6)
Issue 1 June 2005 573
ATM-INTF (TN2305/6)
S8700 MC
The system recognizes a TN2305/6 as an ATM interface board (ATM-INTF) unless it has an
assigned personality (add atm pnc or add atm trunk). ATM-INTF does not have an
associated maintenance strategy, although the:
● list config and change circuit-pack reveal the board
● test board runs an on-demand Control Channel test
● reset board resets the board
Table 186
lists circuit packs that are ATM-EI boards if they are administered to provide ATM
port-network connectivity (ATM PNC).
Note:
Note: Always replace an ATM-EI circuit pack with the same type.
Error Log Entries and Test-to-Clear Values
MO Name in Alarm Log Alarm
Level
Initial Command to Run Full Name of MO
ATM-INTF WRN test board location ATM interface board
Table 186: ATM-EI circuit packs for ATM PNC
Circuit Pack Fiber Echo
Cancellation
TN2305 Multimode Yes
TN2306 Single-mode Yes
Table 187: ATM-INTF Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test-to-Clear Value
23 (a
) 0 None WRN Off
125 (b
) None MINOR On
217 (c
) 0 None WRN Off