Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1910 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Link Retry Test (#215)
This test sends a message to the CDR software process to make a data call to the extension
where the CDR output device connects to. If the CDR link is already up, then this test will be
passed without making any data call.
Table 699: Test #215 Link Retry Test
Error
Code
Test
Result
Description / Recommendation
10 ABRT Internal system error.
20 ABRT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
30 ABRT Internal system error.
1. See Procedures for Restoring the CDR Link
on page 1906 for
instructions.
1010 ABRT The CDR link has been busied out to out-of-service.
1. Enter release cdr-link primary | secondary to release the
CDR link from busyout state.
2. Retry test cdr-link primary | secondary long to execute
the test.
2012 ABRT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
FAIL The CDR link CANNOT be established.
1. See Procedures for Restoring the CDR Link
on page 1906 for
instructions.
PASS The CDR link is up.