Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
682 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order presented. By clearing error codes associated with one test, you
may also clear errors generated from other tests in the sequence.
NPE Audit Test (#50)
See the repair procedure described in XXX-BD (Common Port Circuit Pack) as NPE Audit Test
(#50) on page 2548.
Control Channel Loop Around Test (#52)
See the repair procedure described in XXX-BD (Common Port Circuit Pack) as Control Channel
Loop-Around Test (#52) on page 2551.
SAKI Sanity Test (#53)
Refer to the repair procedure described in XXX-BD (Common Port Circuit Pack) as SAKI Sanity
Test (#53) on page 2552.
LANBIC Receive Parity Error Counter Test (#595)
This test is destructive.
The test reads and clears the LANBIC Receive Parity Error Counter on the circuit pack. This
counter is incremented by the circuit pack when it detects a parity error in data received from the
packet bus.
Order of Investigation Short Test
Sequence
Long Test
Sequence
D/ND
1
1. D = Destructive; ND = Nondestructive
Control Channel Loop-Around test (#52) X X ND
NPE Audit test (#50) X ND
LANBIC Receive Parity Error Counter test (#595) X ND