Filter
Top Products
IPMEDPRO (TN2302 IP Media Processor)
Issue 1 June 2005 1369
8192–
8328
FAIL The FPGA DSP test failed:
1. Enter busyout board location.
2. Enter reset board location.
3. Enter release board location.
4. Enter test board location long.
If the board continues to fail, replace the board.
16384–
16900
FAIL A SCOTCH device failed:
1. Enter busyout board location.
2. Enter reset board location.
3. Enter release board location.
4. Enter test board location long.
If the board continues to fail, replace the board.
24576–
24580
FAIL An ETHERNET device failed:
1. Enter busyout board location.
2. Enter reset board location.
3. Enter release board location.
4. Enter test board location long.
If the board continues to fail, replace the board.
PASS The FPGA device on this TN2302 is operating correctly.
Table 481: Test #1406 MP Diagnostic Test (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 3