Filter
Top Products
ATM-EI (Expansion Interface Circuit Pack)
Issue 1 June 2005 525
ATM-EI (Expansion Interface Circuit Pack)
S8700 MC
ATM-EI covers the ATM circuit pack administered as an Expansion Interface (ATM-EI) for ATM
Port-Network Connectivity (ATM PNC). The ATM-EI provides PNC between a S8700
Multi-Connect server and every PN through the ATM switch.
The circuit packs listed in Table 167: ATM-EI circuit packs for S8700 Multi-Connect
on
page 525 are ATM-EI boards if they are administered to support ATM Port Network Connectivity
(ATM PNC) for
S8700 MC.
Note:
Note: TN230x circuit packs are not interchangeable. Always replace an ATM circuit
pack with the same type.
Note:
Note: ATM switch maintenance is not covered in this section. When S8700
Multi-Connect system maintenance software suspects the ATM switch
connections, it raises appropriate Communication Manager alarms.
To clear any ATM switch faults, refer to the particular ATM switch’s
documentation.
MO Name in Alarm Log Alarm
Level
Initial Command to
Run
Full Name of MO
ATM-EI MAJ test board location ATM Expansion Interface
circuit pack
ATM-EI MIN test board location ATM Expansion Interface
circuit pack
ATM-EI WRN test board location ATM Expansion Interface
circuit pack
Table 167: ATM-EI circuit packs for S8700 Multi-Connect
Circuit pack Fiber Echo cancellation
TN2305 Multimode Y
TN2306 Single mode Y