Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
Communication Manager Maintenance-Object Repair Procedures
1208 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1394 ABRT The EI circuit pack is out of service and the test cannot be run. This
condition is due to a change in the EI circuit pack’s ability to
communicate with the EI or SNI circuit pack on the other end of the
fiber.
1. Run Test #237, and check the Error Log for EXP-INTF Error Type
1281. If Error Type 1281 is present or if Test #237 fails, see repair
procedures for Test #237, in Table 409: Test #237 Expansion
Interface Neighbor Query Test on page 1199.
1395 ABRT This test cannot be run on an EI circuit pack if it is part of the B-side
PNC and duplicated PNC is not enabled.
1. If this test needs to run on this EI circuit pack, use change
system-parameters duplication to enable PNC.
2. Use set pnc lock to prevent the system from doing a PNC
interchange.
3. Repeat this test.
1413 ABRT This test requires the use of a Tone-Clock circuit pack in each of the
PNs used in this test. This abort code indicates that there are none of
these circuit packs located in one of the PNs.
1. Verify that there is a Tone-Clock circuit pack in the PN where the
EI circuit pack under test resides.
2. In a Direct Connect configuration, verify that there is a Tone-Clock
circuit pack in the PN where the neighbor EIEI circuit pack circuit
pack resides.
3. In a Center Stage Switch configuration, verify that there is at least
one other PN, besides the PN where the EI circuit pack under test
resides, with a Tone-Clock circuit pack.
1414 ABRT This test requires the use of an active Tone-Clock circuit pack in each
of the PNs used in this test that does not have a MAJOR or MINOR
alarm logged against it. This abort code indicates that the active
Tone-Clock circuit pack in one of the PNs being used for the test has a
MAJOR or MINOR alarm logged against it.
1. Enter display alarms and resolve every TONE-BD and
TONE-PT alarm.
Table 412: Test #241 Expansion Interface 2-Way Transmission Test (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 5