Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
450 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Uploading/Downloading announcements
Integrated announcements on the TN750 Announcement circuit pack can be uploaded to the
memory card with save announcements. Likewise, integrated announcements can be
downloaded to the Announcement circuit pack with restore announcements. Both of these
commands require a free data module of NETCON type to be administered, a data module of
announcement type (on the Announcement circuit pack) to be administered, and a memory
card. These commands are useful in maintaining the customer’s recorded announcements.
Depending on system traffic, announcement uploads and/or downloads take between 30 and
45 minutes.
The system automatically tries to download the Announcement circuit pack five minutes after it
is inserted. This automatic download procedure is aborted if:
● An announcement is recorded within 10 minutes of circuit pack insertion.
● An announcement download is invoked sooner with the restore announcements.
● No announcement and/or NETCON data module is administered.
● Either the announcement data module is busy or all the administered NETCON data
modules are busy.
● No memory card is in the system.
● The memory card in the system does not have a valid announcement file saved on it.
Hardware error log entries and test to clear values
Table 132: Announcement circuit pack error log entries
Error
type
Aux
data
Associated test Alarm
level
(See
WRN
message)
On/
Off
board
Test to clear value
0 (a
)
0 Any Any Any test board PCSS sh r 1
1 (b
)
0 Circuit pack removed or SAKI Test (#53) MIN ON
2 (c
)
None
14 (d
)
1 to 64 Announcement Checksum (209)
18 0 busyout board PCSS WRN OFF release board PCSS
23 (e
)
0None WRN OFF
1 of 2