Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
476 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
FAIL Test failed. Announcements cannot be played back over this port.
1. Reset the circuit pack via reset board PCSS and then run this test
again. If the test continues to fail, replace the circuit pack (see Warning).
2. If there are recurring alarms on this port caused by this test failing,
replace the circuit pack even if Step 1 works (see Warning).
!
WARNING:
WARNING: Replacing the circuit pack results in loss of integrated
announcements. Refer to General notes
on page 465.
PASS Announcements can be played back over this port. User-reported troubles on
this pack should be investigated using other port and circuit pack tests. Refer
to the ANN-BD (Announcement circuit pack)
on page 447 for a description of
the circuit pack tests.
Table 143: TEST #222 140AY channel sanity inquiry test (continued)
Error
code
Test
result
Description/ Recommendation
2 of 2