Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
Communication Manager Maintenance-Object Repair Procedures
1110 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
2301 ABRT The timer could not be set before sending the downlink message
necessary to run this test.
1. Retry the command at 1-minute intervals up to 3 times.
2316 ABRT Fiber link is not administered. Use add fiber-link to administer the DS1
converter fiber link.
2321 ABRT DS1 converter circuit pack is not busied out.
Use busyout board to busyout the DS1 converter circuit pack.
2332 ABRT With this system configuration (unduplicated PNC), the test was aborted
because it cannot be run at the far end when there is only one DS1-FAC
available. (The link would be lost, and no test results would be seen at the
media server.) Run the test at the other end of the DS1C complex.
2500 ABRT Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
FAIL TN574 DS1 facilities connectivity loop-back test failed.
1 FAIL TN1654 near-end DS1 facility A is connected to far-end DS1 facility B.
2 FAIL TN1654 near-end DS1 facility A is connected to far-end DS1 facility C.
3 FAIL TN1654 near-end DS1 facility A is connected to far-end DS1 facility D.
10 FAIL TN1654 near-end DS1 facility B is connected to far-end DS1 facility A.
12 FAIL TN1654 near-end DS1 facility B is connected to far-end DS1 facility C.
13 FAIL TN1654 near-end DS1 facility B is connected to far-end DS1 facility D.
20 FAIL TN1654 near-end DS1 facility C is connected to far-end DS1 facility A.
21 FAIL TN1654 near-end DS1 facility C is connected to far-end DS1 facility B.
23 FAIL TN1654 near-end DS1 facility C is connected to far-end DS1 facility D.
30 FAIL TN1654 near-end DS1 facility D is connected to far-end DS1 facility A.
31 FAIL TN1654 near-end DS1 facility D is connected to far-end DS1 facility B.
32 FAIL TN1654 near-end DS1 facility D is connected to far-end DS1 facility C.
Table 377: Test #790 DS1 Facilities Connectivity Loop-Back Test (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 3