ATM-TRK (Circuit Emulation Service Circuit Pack)
Issue 1 June 2005 617
ATM-TRK (Circuit Emulation Service
Circuit Pack)
S8700 | 8710 / S8500
ATM-TRK explains how you test and repair TN230x ATM Interface circuit packs (TN2305 and
TN2306) that have been administered as virtual ISDN-PRI trunks for ATM Circuit Emulation
Service (CES). The maintenance instructions for TN230x circuit packs that have been
administered as Expansion Interfaces for WAN connectivity are in the ATM-INTF (TN2305/6)
MO.
Description
The TN2305 and TN2306 (Table 205: R7 ATM-TRK circuit packs on page 617) are
dual-purpose ATM circuit packs that can be administered as either:
● ATM Circuit Emulation Service or virtual ISDN-PRI signaling trunks
● Expansion Interfaces (ATM-EIs) for port-network connectivity (ATM PNC) between the
PNs
Either circuit pack “personality” requires SONET OC-3 or SDH STM-1 fiber cable connections
between the circuit pack and the ATM switch. As a trunk board, it supports direct connection
between ATM CES circuit packs without an intervening ATM switch.
MO Name in
Alarm Log
Alarm
Level
Initial Command to Run Full Name of MO
ATM-TRK MAJ test board location ATM TRUNK (ATM Circuit
Emulation Service)
ATM-TRK MIN test board location ATM TRUNK (ATM Circuit
Emulation Service)
ATM-TRK WRN test board location ATM TRUNK (ATM Circuit
Emulation Service)
Table 205: R7 ATM-TRK circuit packs
Circuit
pack
Channel types Interface Fiber Echo
cancellation
TN2305 B and D
channels
24 or 32
channel
Multimode Y
TN2306 B and D
channels
24 or 32
channel
Single-mode Y