Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1356 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
IPMEDPRO (TN2302 IP Media Processor)
S8700 | 8710 / S8500
The IPMEDPRO Maintenance Object applies to the TN2302 IP Media Processor and the
TN2602AP IP Media Resource 320.
To identify which type of circuit pack is alarmed use the list configuration command for
the location recorded in the error log. If the circuit pack type displayed from the list
configuration command is a TN2302 use this MO. If the circuit pack displayed is a
TN2602AP use IPMEDPRO (TN2602AP IP Media Resource 320)
on page 1380.
The TN2302 (IP Media Processor) circuit pack is the next generation VOIP platform. The
TN2302 includes a 10/100 BaseT Ethernet interface to support IP audio for IP trunks and H.323
endpoints. The TN2302 can perform echo cancellation, silence suppression, DTMF detection,
and conferencing. It supports the following codecs, fax detection for them, and conversion
between them:
● G.711 (mu-law or a-law, 64 kbps)
● G.723.1 (6.3-kbps or 5.3-kbps audio)
● G.729A (8-kbps audio)
The TN2302 circuit board is used to provide voice over IP connectivity. The TN2302 acts as a
service circuit to terminate generic RTP streams used to carry packetized audio over an IP
network. As part of the overall H.323 implementation, the TN2302 circuit pack handles the audio
streams while the TN799DP C-LAN handles the TCP/IP signaling channels.
Error Log Entries and Test to Clear Values
MO Name in Alarm
Log
Alarm
Level
Initial SAT Command to Run Full Name of MO
IPMEDPRO MAJ test board location sh IP Media Processor
IPMEDPRO MIN test board location l IP Media Processor
IPMEDPRO WRN test board location sh IP Media Processor
Table 474: TN2302 IPMEDPRO Circuit Pack Maintenance Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test to Clear Value
1 of 3