Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1254 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
c. Error Type 18: indicates that the fiber link has been busied out via busyout fiber-link
F P. To resolve this error, use release fiber-link F P to release the fiber link.
d. Error Type 257: indicates problem with the circuit path to the neighbor. See Repair
procedures.
e. Error Type 513: indicates problem with the packet path to the neighbor. See Repair
procedures.
f. Error Type 769: indicates problem with the control path from the neighbor. See Repair
procedures.
g. Error Type 1025: indicates problem with the circuit path from the neighbor. See Repair
procedures.
h. Error Type 1281: indicates problem with the packet path from the neighbor. See Repair
procedures.
Repair procedures
For Note b and Notes d through h, perform the following steps:
1. Perform the Fiber link fault isolation
in Chapter 4: General troubleshooting in Maintenance
Procedures (03-300192).
2. Enter display errors and if any of the listed slip errors exist, follow the associated repair
procedures in the SYNC section for slip errors.
Table 432: Error Log Entries for Slip Errors
Circuit Pack’s Name Error Log Name Error Log Entry (for Slips)
DS1 Interface DS1-BD 3073 to 3160
Expansion Interface EXP-INTF 2305
SNI SNI-BD 1537
Tone-Clock TDM-CLK 1025
UDS1 Interface UDS1-BD 3073 to 3160