Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
628 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
2. Follow the repair procedures suggested for Test #1293.
q. Error Type 3330: LANHO critical error. The circuit pack reports that the on-board LANHO
chip is insane (possibly due to a problem in packet-bus arbitration, in the transmission line
frame, or in the circuit pack itself). The circuit pack cannot talk to the packet bus.
1. Check for PKT-BUS alarms.
Error
Type
Description
2818 One or more DSPs failed. The Aux Data field contains the ID number
of DSP that failed
2817 DSP test failure. The Aux Data field contains the following
information about the failed DSPs:
X is the number of talker DSPs
Y is the number of listener DSPs
Z is the number of echo-cancelling DSPs
If Then
There is a packet-bus alarm There is probably a packet-bus problem,
particularly if other circuit packs on the packet
bus report the same error. See PKT-BUS
(Packet Bus) and Isolating and repairing
packet-bus faults in Maintenance Procedures
(03-300192) for repair procedures.
There are no packet-bus
alarms
Run the following command sequence:
1. busyout board location
2. reset board location
3. test board location long
4. release board location
The problem persists Replace the ATM-TRK circuit pack.