Filter
Top Products
ASAI-EPT
Issue 1 June 2005 493
1113 FAIL The signaling link is not “bound” to the adjunct. For ASAI adjuncts this
error indicates that the link is disconnected at Layer 2. Since the signaling
link associated with the endpoint has been identified by administration, the
link is only “unbound” from the endpoint when it is disconnected.
1. Execute status bri-port location and see BRI-PORT
(ISDN-BRI Port) on page 685.
PASS The signaling link is connected at Layer 2 and “bound” to the ASAI adjunct.
Table 148: Test #626 Signaling Link Status Test (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 2