Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
Communication Manager Maintenance-Object Repair Procedures
1990 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Speech Synthesis PSS Handshake Test (#168)
This test verifies control functionality between the on-board microprocessor and programmable
speech synthesizer (PSS) controller. A failure occurs if either of the following events occur:
The on-board microprocessor times out while waiting for the PSS controller to respond.
An invalid command is received by the on-board microprocessor from the PSS controller.
This type of failure will affect all four ports on the Speech Synthesis circuit pack, resulting in
errors or alarms on each port.
Table 734: TEST #168 Speech Synthesis PSS Handshake Test
Error
Code
Test
Result
Description / Recommendation
ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1000 ABRT System resources required to run this test are not available. The port may
be busy with a valid call and therefore unavailable for certain tests. Wait
until the port is idle (amber LED is off) before retesting.
1. If the port is idle, retry the command at 1-minute intervals up to 5 times.
2000 ABRT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals up to 5 times.
2100 ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
Any FAIL The on-board microprocessor has timed out while waiting for the PSS
controller to respond or an invalid command has been received by the
on-board microprocessor from the PSS controller. This type of failure may
cause features using the Speech Synthesis port’s speech services to
malfunction.
1. Replace the circuit pack.
PASS The on-board microprocessor/PSS handshake is working correctly.
User-reported troubles should be investigated using other tests and by
verifying other ports on this circuit pack are working correctly.