Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1306 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
2 FAIL The image file header on the source board is invalid.
1. FTP a good firmware image file to the source board.
3 FAIL Firmware image file on the source board has a bad CRC.
1. FTP a good firmware image file to the source board.
4 FAIL Firmware image file name is too long.
1. Rename the image file to a file name of the correct size.
2. FTP the new image file to the source board.
3. Execute the change firmware download command, and enter the
new file name on the screen.
5 FAIL The TN code of the firmware image file on the source board does not
match the TN code entered on the screen. The firmware file is incorrect for
the board type entered on the screen.
1. Execute the list directory board location command, and
verify that a file system is enabled on the board and the file is present.
2. If the file system is not enabled, execute the enable filesystem
command, and FTP the correct firmware image to the source board.
3. Execute the change firmware download command, and enter the
new file name on the screen.
6 FAIL The suffix of the firmware image file on the source board does not match
the suffix entered on the screen. The firmware image file is incorrect for the
board types entered on the screen.
1. Execute the list directory board location command, and
verify that a file system is enabled on the board and the file is present.
2. If the correct firmware image is not present, FTP the correct firmware
image to the source board.
3. Execute the change firmware download command, and enter the
new file name on the screen.
Table 450: TEST #1413 Firmware Download Test (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 3