MMI-PT
Issue 1 June 2005 1669
MMI-PT
S8700 | 8710 / S8500
Note:
Note: Refer to Chapter 4: General troubleshooting in Maintenance Procedures
(03-300192) for MMCH troubleshooting information.
The Multimedia Interface circuit pack provides a number of H.221 protocol terminations for bit
streams received from the TDM bus. The Multimedia Interface demultiplexes the H.221 bit
stream (audio, video, data, control, and indication signals) and transmits the bit streams onto
the TDM bus to be processed by the appropriate circuit packs.
Each Multimedia Interface circuit pack contains 32 separately maintained “ports,” more
commonly referred to as “resources.” MMI-PT represents one of these 32 resources. At system
boot or when the circuit pack is inserted, 32 resources are inserted into the system.
The MMI circuit pack contains 4 Digital Signal Processors (DSPs) which manage the 32
resources. These resources are directly mapped to DSPs:
All 8 resources that the circuit pack controls may be placed out of service by the failure of one of
these DSPs.
MO Name in
Alarm Log
Alarm
Level
Initial SAT Command to Run Full Name of MO
MMI-PT MAJ test port location l r# Multimedia Interface Port
MMI-PT MIN test port location l r# Multimedia Interface Port
MMI-PT WRN test port location l r# Multimedia Interface Port
Resource Direct Map
1–8 DSP1
9–16 DSP2
17–24 DSP3
25–32 DSP4