Communication Manager Maintenance-Object Repair Procedures
490 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
50 Requested
facility not
subscribed
Requested facility is implemented, but not administered. Potential
administration problem with endpoint or adjunct.
For BRI endpoints:
1. Verify the switch administration of endpoint using display
station or display data-module.
2. If step 1 does not resolve the problem, refer to the endpoint’s
service manual and verify administration on the endpoint.
For ASAI adjuncts:
1. Display the Customer Optional Features screen (administration
screen) on the switch to determine which ASAI capabilities are
turned on in the switch.
2. Verify that the adjunct is administered to support the identical
capabilities as the switch. If there is a mismatch in the
administered capabilities, then re-administer the switch and/or
the adjunct to establish a consistent set of desired capabilities
on both the switch and the adjunct.
58 Bearer
capability not
currently
available
Requested bearer capability is implemented, but not administered.
No B channel is administered. See code 50 above.
63 Service or
option not
available
Requested ASAI capability or resource is not available on the switch
or adjunct. More than one adjunct may be contending for the same
switch resource. Potential administration mismatch between the
resource domains administered on the switch and those
administered on the adjunct.
1. Verify that no overlapping administration of switch resources (for
example, requesting notifications on a single domain by multiple
adjuncts attempting to control a single call) exists across any
adjunct connected to the switch. If an overlap exists, then
re-administer the adjuncts to ensure that each adjunct is
associated with a unique set of switch resources.
65 Bearer
service not
implemented
Requested service not implemented in switch or endpoint.
Table 147: ASAI cause values (continued)
Code Explanation Recommendation
2 of 3