Filter
Top Products
Alarms in Linux Media Servers
Issue 1 June 2005 71
21
(cont’d)
11 Recalibration Retries Number of times recalibration was
requested after initial request. (Samsung,
Seagate, IBM (Hitachi), Fujitsu, Maxtor,
Western Digital)
12 Device Power Cycle
Count
Count of full hard disk power on/off
cycles. (Samsung, Seagate, IBM
(Hitachi), Fujitsu, Maxtor, Western Digital)
13 Soft Read Error Rate Rate of program read errors when
reading data from disk. (Samsung,
Seagate, IBM (Hitachi), Fujitsu, Maxtor,
Western Digital)
193 Load/Unload Cycle Count of load/unload cycles into landing
zone position. (Samsung, Seagate, IBM
(Hitachi), Fujitsu, Maxtor, Western Digital)
194 Temperature Hard disk drive temperature. (Samsung,
Seagate, IBM (Hitachi), Fujitsu, Maxtor,
Western Digital - select models)
196 Reallocated Event
Count
Count of remap operations (transferring
of data from bad sector to reserved disk
area) successful and non-successful.
This error is critical. An increasing
count for this error may indicate a
failing disk drive. (Samsung, Seagate,
IBM (Hitachi), Fujitsu, Maxtor, Western
Digital - select models)
197 Current Pending Sector
Count
Current count of unstable sectors (waiting
for remap). This error is critical. An
increasing count for this error may
indicate a failing disk drive. (Samsung,
Seagate, IBM (Hitachi), Fujitsu, Maxtor,
Western Digital)
198 Uncorrectable Sector
Count
Count of uncorrectable errors when
reading/writing a sector. This error is
critical. An increasing count for this
error may indicate a failing disk drive.
(Samsung, Seagate, IBM (Hitachi),
Fujitsu, Maxtor, Western Digital)
Table 17: HDD Alarm in Media Server (continued)
Event
ID
Alarm
Level
Alarm Text, Cause/Description, Recommendation
3 of 4