Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
ISDN-SGR (ISDN-PRI Signaling Group)
Issue 1 June 2005 1429
ISDN-SGR (ISDN-PRI Signaling Group)
S8700 | 8710 / S8500 / S8300
An ISDN-PRI Signaling Group is a collection of B channels for which a given ISDN-PRI
Signaling Channel Port (D channel) carries signaling information. B channels carry voice or
data and can be assigned to DS1 ISDN trunks (ISDN-TRK) or PRI endpoint ports (PE-BCHL).
Note:
Note: Throughout this discussion, the term “B channel” refers to an ISDN-TRK or
PE-BCHL, depending on the application under investigation.
The following circuit packs/media modules are supported in the implementation of ISDN-PRI.
The TN464C/D UDS1 Interface circuit pack and MM710 DS1 Interface Media Module, which
have a direct interface to the packet bus, are required for D-channel signaling. There are two
types of DS1 interfaces:
24 DS0 channels on a 1.544-Mbps link
31 DS0 channels + 1 framing channel on a 2.048-Mbps link
The following discussion describes 24-channel interface signaling groups. The 32-channel
interface works the same way, except that only port number 16 is used for signaling instead of
port number 24. Ports 1 through 15 and 17 through 31 are used for B channels. The 32
nd
channel (port 0) is always used for framing.
MO Name in
Alarm Log
Alarm
Level
Initial SAT Command to Run
1
1. grp# is the signaling group number (1–166); the test sequence can be either short or long.
Full Name of MO
ISDN-SGR MIN test signaling-group grp# ISDN-PRI Signaling Group
ISDN-SGR WRN test signaling-group grp# ISDN-PRI Signaling Group
Circuit Pack/
Media Module
Channel Types Interface
MM710 B and D Channels 24 or 32 channel
TN464C/D B and D channels 24 or 32 channel
TN767 B channels 24 channel
TN464B B channels 32 channel
(G3r V2 only)
TN767B or later B channel with ISDN-PRI D-channel over PI-BD 24-channel
TN464F/GP B channel with ISDN-PRI D-channel over PI-BD 24- or 32-channel