Filter
Top Products
ETR-PT (Enhanced Tone Receiver Port)
Issue 1 June 2005 1175
FAIL
(cont’d)
10. Test the alarmed board (test tone location long). This resets
the board and is required to reload on-board RAM associated with the
TN2182’s/TN2312AP’s DSPs.
11. If every test passes and the alarm does not resolve, retest with test
tone location long clear.
12. If the test passes, terminate the repair process. If it fails, replace the
board. Follow the procedures in TONE-BD.
PASS The ETR port has passed the sanity inquiry.
Table 404: Test #43 Tone Detector Audit/Update Test (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 3