Communication Manager Maintenance-Object Repair Procedures
474 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Notes:
The Announcement circuit pack can exhibit a condition that does not allow recording.
If the circuit pack gets locked into this state (this is an extremely rare condition), two of the
Announcement Ports on the circuit pack (one of which is the record port) will be unusable by
software. Also, save/restore announcements will not work, since the record port looks
busy to the circuit pack. Note that software does not have any way of knowing this and attempts
to use the ports.
1
to
254
FAIL Test failed. The error code indicates the number of byte count errors found
by the Tone Detector.
1. Reset the circuit pack via reset board PCSS and then run this test
again. If the test continues to fail, replace the circuit pack (see Warning).
2. If there are recurring alarms on this port caused by this test failing,
replace the circuit pack even if Step 1 works (see Warning).
!
WARNING:
WARNING: Replacing the circuit pack results in loss of integrated
announcements. Refer to General notes
on page 465.
255 FAIL Test failed. The Announcement Port and the Tone Detector never
synchronized. Check for active GPTD-PT errors, and refer to GPTD-PT
(General-Purpose Tone Detector Port) on page 1308 to diagnose them first.
1. If there are no active GPTD-PT errors, reset the circuit pack via reset
board PCSS and then run this test again. If the test continues to fail,
replace the circuit pack (see Warning).
2. If there are recurring alarms on this port caused by this test failing,
replace the circuit pack even if Step 1 works (see Warning).
!
WARNING:
WARNING: Replacing the circuit pack results in loss of integrated
announcements. Refer to General notes
on page 465.
PASS This port can cleanly play announcements. User-reported troubles on this
pack should be investigated using other port and circuit pack tests. Refer to
ANN-BD (Announcement circuit pack)
on page 447 for a description of the
circuit pack tests.
Table 142: TEST #206 playback speech memory array (PSMA) test (continued)
Error
code
Test
result
Description/ Recommendation
3 of 3