Filter
Top Products
ISDN-TRK (DS1 ISDN Trunk)
Issue 1 June 2005 1459
Table 525: Test #7 Conference Circuit Test
Error
Code
Test
Result
Description / Recommendation
ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1000 ABRT System resources required to run this test are not available. The port may
be in use on a valid call. Use status station or status trunk to
determine when the port is available for testing.
1004 ABRT The port has been seized by a user for a valid call. Use status station
or status trunk to determine when the port is available for testing.
1. Retry the command at 1-minute intervals up to 5 times.
1018 ABRT Maintenance is disabled on this trunk.
1. Enable maintenance by entering y in the Maintenance Tests field
on of the change trunk-group form.
1020 ABRT The test did not run due to an already existing error on the specific port or
a more general circuit pack error.
1. Examine Error Log for existing errors against this port or the circuit
pack and attempt to diagnose the already existing error.
S8300 /
G700
1412
ABRT This test does not execute on a G700/G350 Media Gateway.
2000 ABRT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals up to 5 times.
2100 ABRT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
Any FAIL The NPE of the tested port did not conference the tones correctly. This will
cause noisy and unreliable connections.
1. Replace the circuit pack.
PASS The port can correctly conference multiple connections. User-reported
troubles on this port should be investigated using other port tests and
examining station, trunk, or external wiring.