Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1664 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
Table 616: Test #1122/1123 MMI Synchronization Status Test
Error
Code
Test
Result
Description / Recommendation
ABRT Internal system error. This is an abnormal abort.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABRT A response to the test was not received from the MMI circuit pack within
the allowable time period.
1. If this result occurs repeatedly and the MMI circuit pack is idle, reset
the circuit pack using busyout board location, reset board
location, and release board location.
2. Rerun the test; if the same result occurs again, replace the MMI circuit
pack.
2012 ABRT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
2100 ABRT Could not allocate the necessary resources to run this test. This is an
abnormal abort.
1. Retry the command at 1-minute intervals up to 5 times.
FAIL The MMI circuit pack is out of MMI synchronization. Run the long option
of the test board command.
1. Wait up to 5 minutes, and then reset the circuit pack with busyout
board location, reset board location, and release
board location.
2. Rerun the test; if the same result occurs again, replace the circuit
pack.
1100 PASS The MMI circuit pack is providing the synchronization correctly. This MMI
circuit pack is designated as the Master Sync source.
1101 PASS The MMI circuit pack is listening to the synchronization signal correctly.