Avaya 03-300430 Home Security System User Manual


  Open as PDF
of 2574
 
Denial Events
214 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1611 Not MM station/chnl busy Sending down the MultiMedia Call Handling
Basic mode activation message to the User
Manager fails. Possible causes:
station not part of Multi-media
data user busy on at least one channel.
1612 Svc link creation failure Sending down the MultiMedia Call Handling
Enhanced mode deactivation message to the
User Manager fails. Might be the creation of a
service link failed.
1613 BCC query failed MultiMedia Call Handling multinumber type call.
Query of USER_M for bearer capability failed.
1614 Ctrl rstrct/DND fail Controlled restriction activation/ deactivation, with
possible interaction with do-not-disturb. Failure
return from (dpm_crstrict() or awu_cancel()).
1615 Rstrct typ/featid/usr id Initial processing supervision for controlled
restriction. Possible causes:
originator’s User ID not found in
DP_MGR User ID data tables
restriction digit does not identify with
outward, total, termination or
station-to-station type restriction
featid is not one of:
- activate user control restriction
- deactivate user control restriction
- activate group control restriction
- deactivate group control restriction
1616 Ctrl rstrct featid bad Initial processing supervision for controlled
restriction. Might be featid is not one of:
activate user control restriction
deactivate user control restriction
activate group control restriction
deactivate group control restriction
1617 Dialing tmo/invalid digit Supervisor for Logical Agents is logging in by
dialing LoginID digits, dialing timeout occurs or
an invalid digit is dialed.
1618 Paging timeout Loudspeaker paging seizure supervision. Might
be a paging timeout.
1619 LWC access cod dgt invld Supervision for Leave Word Calling access code.
Processing invalid digit dialed.
1620 LWC access code rejected Supervision for Leave Word Calling access code.
Processing msg_sv rejects code.
1621 Software invalid stim Invalid Call Processing (CP) message stimulus’d
to Malicious Call Trace supervisor.
1622 BCC selection digit invld Supervision for multimedia parameter selection.
Invalid digit dialed for selecting bearer capability
for call.
1623 MM parm select failure Supervision for multimedia parameter selection.
error returned from gm_ftr_act().
Table 50: Call Process denial events (1225 - 1899) (continued)
Event
Type
Event Description, as it
appears on the event log
Explanation Event
Data 1
Event Data 2
22 of 33