Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
2088 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
137 FAIL The SNI’s administered neighbor does not match the physical neighbor
connected. The type of neighbor administered is an EI and the type of
neighbor physically connected is an SNI.
1. Enter list fiber-link, and verify that the fiber-optic cable and
metallic cable connections are installed as administered.
138 FAIL The physical neighbor location does not match administered neighbor
location. The carrier and slot of the administered neighbor do not match
the carrier and slot of the physical neighbor.
1. Enter list fiber-link, and verify that the fiber-optic cable and
metallic cable connections are installed as administered.
2. If the problem does not seem to be caused by a physical connection
problem or an administration problem, replace the neighbor circuit
pack. It is possible for the neighbor circuit pack to have a hardware
problem that causes it to report a wrong angel address (physical
carrier/slot address) to software.
139 FAIL The SNI is administered as connected to a DS1C but is not physically
connected to a DS1C.
If a DS1C is not supposed to be connected to this SNI, change
administration to remove the DS1 converter complex from the fiber link
associated with this SNI:
1. Use list fiber-link to determine the fiber associated with the
SNI.
2. Use remove fiber-link to remove the fiber.
3. Use add fiber-link to add the fiber back, and do not administer
the DS1 converter complex at this time.
Table 752: TEST #759 Configuration Audit (continued)
Error
Code
Test
Result
Description / Recommendation
12 of 13