Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
802 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
PPE/LANBIC Receive Parity Error Counter
Test (#595)
This test is nondestructive. When the C-LAN circuit pack detects a parity error with a received
frame, it increments the PPE/LANBIC Receive Parity error counter. This test reads and clears
the counter, and may verify repair of problem.
Errors may indicate a problem with:
● This circuit pack
● A packet bus
● Another circuit pack on the bus
Table 272: Test #595 PPE/LANBIC Receive Parity Error Counter Test
Error
Code
Test
Result
Description / Recommendation
2000 ABRT Did not receive circuit pack test response within the allowable time period.
1. Retry command at 1-minute intervals up to 5 times.
2. If the problem persists, reset the circuit pack with reset board
location.
3. If the problem persists, replace the circuit pack.
2100 ABRT Could not allocate the necessary system resources to run test.
1. Retry the command at 1-minute intervals up to 5 times.
2500 ABRT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the problem persists, escalate the problem.
1–10 FAIL Circuit pack detects parity errors. The Error Code indicates the value of the
on-board error counter.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to fail, execute Packet Interface test (#598) (test
board location).
3. If Packet Interface test (#598) fails, see packet-bus repair procedures.
PASS Circuit pack detects no errors.