Filter
Top Products
Alarms in Linux Media Servers
Issue 1 June 2005 35
Backup and Restore Traps
The S8300 uses the LAN to backup a copy of its translation data. Table 7: Backup and Restore
Traps on page 35 illustrates the backup and restore traps.
Linux Media Server MOs and Alarms
Hardware MOs
The server’s hardware MOs are described in the following sections:
● DAJ1/DAL1 (Duplication Memory Board) on page 49
● RALM-SVC (Remote Alarm Service) on page 76
● USB1 (Modem Testing) Alarms on page 95
● UPS (Uninterruptible Power Supply) on page 89
● Remote Maintenance Board (RMB) Alarms on page 116
Table 7: Backup and Restore Traps
Trap Description
Successfully stored
backup
A trap of informational severity is sent when backup is successful.
(REPLY_ACK) The trap reads “Successful backup of S8300
translation data,” and names the backup location stored in the
string “BACKUP_LOCATION.”
This information also goes to the local maintenance screen, since
it is very possible that a backup is being requested as a result of an
on-site attempt to replace the S8300.
No backup data stored A trap of major severity is sent as soon as a REPLY_ERROR
message is returned. The trap states “Translation Data backup not
available,” and names the backup location stored in the string
“BACKUP_LOCATION.”