Filter
Top Products
OPS-LINE (DS1 Off-Premises Station Line)
Issue 1 June 2005 1743
G700
:
1412
ABRT This test does not execute on a G700 media gateway.
2000 ABRT The test was aborted because response to the test was not received
within the allowable time period.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test aborts with Error Code 2000 again, run short test sequence
on the associated DS1-BD or UDS1-BD. If Tests 138 through 145 on
the associated DS1-BD or UDS1-BD are also aborting with Error
Code 2000, hyperactivity on the board or facility is indicated. In this
case, the hyperactivity problem should be dealt with first.
2100 ABRT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
Table 645: Test #7 Conference Circuit Test (continued)
Error
Code
Test
Result
Description / Recommendation
3 of 5