Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
338 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
AC-POWER for DC-Powered Systems
Note:
Note: In a DC-powered multicarrier cabinet, the AC-POWER MO exists but serves no
functional purpose. Because the system cannot determine the type of power
used, the AC-POWER test should always pass or abort. See CARR-POW
(Carrier Power Supply) on page 770 for the maintenance strategy for power
components in DC cabinets.
S8700 MC supports three cabinet types for PNs: multicarrier cabinets (MCCs), single-carrier
cabinets (SCCs), and 19-inch rack mounted cabinets. Every type may be powered by either an
AC or DC power source. Environmental maintenance differs according to a cabinet’s type and
its power supply.
S8700 IP supports 19-inch rack mounted cabinets, powered by either an AC or DC power source.
Error Log Entries and Test to Clear Values
MO Name in Alarm Log Alarm
Level
Initial Command to Run Full Name of MO
AC-POWER WRN test environment location AC Power
Table 89: AC Power Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Test to Clear Value
0
1
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each
appropriate test’s description, and follow its recommended procedures.
0 Any Any Any test environment UU sh r 1
513 Any AC Power Query test
(#78)
WRN OFF test environment UU sh r 1