Filter
Top Products
Denial Events
228 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
1916 IP RRJ-No H323
NonStdData
Registration rejected because
Non-standard Data (NSD) is missing in
the registration request (RRQ) from the
endpoint.
0 IP address of
the endpoint
1917 IP RRJ-Invld H323 ObjID Registration rejected because the H323
Object ID in the registration request
(RRQ) is invalid.
Object ID in
RRQ
IP address of
the endpoint
1918 IP RRJ-Invld H225 NSData Registration rejected because cannot
decode H225 Non-standard Data (NSD)
message.
0 IP address of
the endpoint
1919 IP RRJ-Bad H225
NSDchoice
Registration rejected because an
unexpected Non-standard Data (NSD)
message was received from the
registering application.
NSD choice in
RRQ
IP address of
the endpoint
1920 IP GRJ-RRJ: new LM fail Registration rejected because of failure in
creating a new Login Manager. Possible
causes are:
● No available heap memory to
create LoginMgr
● Cannot start LoginMgr timer
● Clock not set
UID IP address of
the endpoint
1921 IP RRJ-IP-TTI port fail Registration rejected because of failure
when inserting the IP Terminal
Translation Initiation (TTI) port.
UID IP address of
the endpoint
1922
Communi-
cation
Manager
Release
2.1 and
earlier
IP RRJ-TTI inactive Registration rejected for an IP set with
Terminal Translation Initiation (TTI)
service. Possible causes:
● TTI is not enabled on the
System Parameters Customer
Options screen.
● Remote Office is not enabled on
the System Parameters Feature
Options screen.
0 IP address
1922
Communi-
cation
Manager
Release
2.2
IP RRJ-TTI or RO inactive Registration rejected for an IP set with
Terminal Translation Initiation (TTI)
service. Possible causes:
● TTI is not enabled on the
System-Parameters
Customer-Options screen.
● Remote Office is not enabled on
the Feature Related
System-Parameters screen.
0 IP address
1922
Communi-
cation
Manager
Release
3.0
IP RRJ-TTI or RO inactive Registration rejected for an IP set with
Terminal Translation Initiation (TTI)
service. Possible cause is TTI is not
enabled on the System-Parameters
Customer-Options screen.
IP address of the
endpoint
TTI state where:
0=TTI off
2=TTI on for
voice
3=TTI on for
data
Table 52: IP Denial Events (1907 - 2020) (continued)
Event
Type
Event Description, as it
appears on the event log
Explanation Event Data 1 Event Data 2
3 of 13