Communication Manager Maintenance-Object Repair Procedures
2198 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
a LAPD parameter mismatch. LAPD should recover from this problem, but it may degrade
the performance of the LAN bus.
When this error is reported, maintenance reads and clears the board counter and logs the
problem in the maintenance error log.
o. Error Type 3843: bad translation RAM detected, but the call continues by using another
translation location. The circuit pack reports this error when it cannot update NPE/NCE
memory and read it back. This error is not service-affecting and can be ignored, but can
lead to other types of errors against this circuit pack.
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order presented below. Clearing Error Codes associated with the one
test may also clear errors generated from other tests in the sequence.
Control Channel Loop-Around Test (#52)
See the procedure described in XXX-BD (Common Port Circuit Pack/Media Module) on
page 2539.
NPE /NCE Audit Test (#50)
See the procedure described in XXX-BD (Common Port Circuit Pack/Media Module) on
page 2539.
SAKI Sanity Test (#53)
This test is destructive.
See the procedure described in XXX-BD (Common Port Circuit Pack/Media Module)
on
page 2539. This test is only run as a part of a reset board procedure.
Order of Investigation Short Test
Sequence
Long Test
Sequence
D/ND
Control Channel Loop-around test (#52) X X Nondestructive
NPE/NCE Audit test (#50) X Nondestructive
LAN Receive Parity Error Counter test (#595) X Nondestructive