Filter
Top Products
S8300 Media Server LEDs
Issue 1 June 2005 287
S8300 LED lighting sequence
In general, S8300 LEDs light in order from top to bottom, then from left to right on the S8300
faceplate.
The following order applies during restart or boot of the S8300:
1. ALM - RED: lights up first then turns off.
2. TST - GREEN: lights up second then turns off.
3. ACT - YELLOW: lights up third then turns off.
4. OK To REMOVE - GREEN: lights up fourth then turns off.
5. LEFT LED in SERVICES jack - GREEN (10 MB link speed): lights up fifth then turns off.
6. LEFT LED in SERVICES jack - YELLOW (100 MB link speed): lights up sixth then turns off.
7. RIGHT LED in SERVICES jack - GREEN: lights up seventh then turns off.
H.248 Registered Off
Shutdown in Progress 1 Hz flash
Shutdown Complete On
Table 79: ENET Link/Activity (green LED)
ENET Link/Activity
Power On Reset Off
BIOS Boot N/A
OS and SW Boot N/A
System Up Link Status
H.248 Registered Link Status
Shutdown in Progress Unknown
Shutdown Complete Off
Table 78: OK to Remove (green LED) (continued)
OK to Remove
2 of 2