Filter
Top Products
Communication Manager Maintenance-Object Repair Procedures
1398 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
2801 ABRT The IP Media Resource has not been administered on the
ip-interfaces form.
2806 ABRT The system could not find any in-service IP Media Resources to use as a
destination for this test.
2807 ABRT The specified IP Media Resource has been disabled on the ip-interfaces
screen.
10XX
XX = PN #
FAIL The test tone was not successfully sent from the IP Media Resource
specified in the test command, and not successfully received by an IP
Media Resource in the PN specified in the error code (XX). Source to
destination direction failed. Destination to source direction not tested.
XX = PN number.
1. Resolve all other board alarms for the specified source IP Media
Resource.
2. Resolve all other board alarms for the IP Media Resources in the
destination PN.
3. Use ping and traceroute to localize the problem to the customer’s
LAN/WAN IP network.
20XX
FAIL The test tone was successfully sent from the IP Media Resource specified
in the test command and received by an IP Media Resource in the PN
specified in the error code (XX).
The test tone was not successfully sent in the reverse direction.
Destination to source direction failed. Source to destination direction
passed.
1. Resolve all other board alarms for the specified source IP Media
Resource.
2. Resolve all other board alarms for the IP Media Resources in the
destination PN.
3. Use ping and traceroute to localize the problem to the
customer’s LAN/WAN IP network.
PASS The customer network is functioning properly. The test tone was
transmitted and received successfully between:
● The IP Media Resource specified in the test command
● Every other IP Media Resource in the set of connected IP network
regions.
Table 494: Long IP 2-Way Transmission Test (#1506) (continued)
Error
Code
Test
Result
Description / Recommendation
2 of 3